...spin brush button when pressed is illuminated. Suction is fine. The brush is free of debris. But it is not spinning. I am having the same issue. The brush won't even move when I turn it with my hand. ...
...spin brush attachment - the main port that the attachment plugs into is not spinning. Is this repairable? Sometimes it can be the inside rod of the brush barrel has resonated hair build up preventing ...
Question about Hoover Vacuums
...brush to spin around better Kristie, I would suggest taking the brush bearings at each end off and clean any lint or hair that might be in the ends of the brush. If you have regular ball bearings on ...
...brush to spin slower. If the brush does not spin, you have a broken belt and you will need to replace it. The Magnesium has a sensor that looks for the brush to spin at a certain speed and if it does ...
...spin - Brush motor check? So brush doesnt spin. Belt good, roller is clean, can I check voltage when the head is off? Continuity measures? A broken drive belt, damaged brush roll, jammed brush roll ...
brush is supposed to spin in these holders. If it does not, provided the belt is okay, the location where the brush contacts these holders need to be cleaned and lubricated with some WD40 or some 3 In
...spin brush indicator when brushes attached to machine does not rotate If this is a Hoover Steam vac, the turbine which drives the brushes is bad. If not a Hoover, then what is it, they are different, ...
Question about Vacuums
I have cleaned a mess of stuff out of the brushes but they still don't turn. the square housing the brush assembly fits into does not spin If the brush will not spin freely it will need to be replaced
...brush was free to spin the other side that has the rectangular piece to help hold into place seems to be locked up and will not spin is it corroded or have i lost a piece that joins with it that ...
65 questions posted
Usually answered in minutes!
100 Questions
4 Questions
