2001 Toyota Prius "diagnostic mode codes" Questions

Ad

...diagnostic mode, complete the following actions: With the ignition turned OFF, short the rear parking assist diagnostic connector to ground while the vehicle is in PARK. For the location of the rear ...

Ad

Question about Toyota Prius

1 Answer

diagnostic test modes: user mode. diagnosis mode. The ignition switch is used to alternate from one mode to another. Diagnosis Mode The diagnosis mode will display any fault present in the system. The

Ad

...diagnostic mode and flash the fasten seat belts indicator and sound the chime equal to the number of DTCs stored in the BCM memory. If no DTCs are stored, the BCM will not flash the fasten seat belts ...

...diagnostic mode and flash the fasten seat belts indicator and sound the chime equal to the number of DTCs stored in the BCM memory. If no DTCs are stored, the BCM will not flash the fasten seat belts ...

Question about Toyota Prius

1 Answer

...diagnostic mode selector on ECM fully clockwise. Wait at least 2 seconds. Turn diagnostic mode selector on ECM fully counter clockwise . Self diagnosis in mode 2 Mil should flash. If the scan tool ...

...diagnostic mode on the diagnostic tool: Diagnostic Data Link. Enter the following diagnostic mode on the diagnostic tool: PCM. Enter the following diagnostic mode on the diagnostic tool: Active ...

...diagnostic mode, complete the following actions: With the ignition turned OFF, short the rear parking assist diagnostic connector to ground while the vehicle is in PARK. For the location of the rear ...

Question about Toyota Prius

1 Answer

...diagnostic mode. thank you There is a connector under the steering column, you need to buy an OBD 2 system scanner to plug into that connector and access the codes. The system is always in diagnostic ...

...diagnostic mode selector, located in a round opening on the side of the engine computer, until it stops. Observe the small red and green LED lights on the side of the computer next to the mode ...

Question about Toyota Prius

1 Answer

Mode II (Self-diagnostic Results) 1. Confirm that accelerator pedal is fully released, turn ignition switch ON and wait 3 seconds. 2. Repeat the following procedure quickly five times within 5 seconds

Not finding what you are looking for?
2001 Toyota Prius Logo

181 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2008 Toyota Prius
2008 Toyota Prius

197 Questions

2006 Toyota Prius
2006 Toyota Prius

125 Questions

2004 Toyota Prius
2004 Toyota Prius

119 Questions

2002 Toyota Prius
2002 Toyota Prius

97 Questions

2005 Toyota Prius
2005 Toyota Prius

88 Questions

Top Toyota Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...