Question about Jeep Cherokee
...correct tire pressure for the jeep trying to find the correct tire pressure the label on the door is missing its on all uSA cars , drivers door. and in glove box operators guide, lost that. buy ...
...correct for my vehicle but it appears that the fittings are backwards at the steering drive box. The low pressure hose has the narrow fitting which means it must go in the hole closest to the engine ...
valve regrind I am about to undertake a valve regrind on a 98 turbo diesel, has anyone run into any problems carrying this out on jeep? sure , valve grind, vast ways to mess up. are you taking the ...
...correct amount of fuel getting into the fuel Rail, and a plugged filter might be the culprit. There is a way to check that Fuel is getting to the Fuel Rail. On top of the motor, there will be a long ...
...correct tire pressure? every different vehicle and different tire has a (correct) tire pressure for that particular application.check your drivers door sticker or plate for tire size and pressure and ...
correct tire pressure? We don't have the owner's manual. the correct tire pressure is not necessarily vehicle specific. If you look on the sidewall of the tire there will be the pressure specification
Question about Jeep Cherokee
...tires are at correct tire pressure. Now it won't go off at all. First, check the tire pressure of the spare. If all tires are properly inflated, then one of the sensors are bad and must be
Question about Cars & Trucks
...correct tire pressure (35 PSI unless you don't have standard tires- don't fill it to the "Max" pressure on the sidewall) . Drive your Titan for about 15 minutes while going at least 15 MPH. After the ...
...correct Hi, the tire pressure monitor detects any changes in the tire inflation pressure. Therefore, it must initialize and store it in its memory if the tires or wheels have been replaced, ...
...correct tire pressure? What is correct tire pressure on 2001 lincoln town car? Sticker on door jamb is illegible. 32 lbs. p.s.i. is the car industry norm.i would go with that. 35psi front and rear. ...
1,780 questions posted
Usually answered in minutes!
1,162 Questions
698 Questions
672 Questions
659 Questions
325 Questions