2005 Jeep Liberty "reset locks mountaineer" Questions

... Are you traveling high ground like Rocky Mountain? I will remove the ground cable for 4 minutes to reset all data in ECU.///clock and radio stations too : ( Let the ECU to relearn the local ...

...reset-mercury-mountaineer-alarm.html If these instructions don't work, you can try resetting the car's computer by unplugging the battery for half an hour. However, that will reset the keyless entry ...

...reset the remote to my 2004 mercury mountaineer I have an after market remote to my 2004 Mercury Mountaineer. It stopped working, wouldn't lock/unlock the truck and I couldn't use the remote start. I ...

...mountaineer replaced the ignition,need to know how to reprogram the new keys Sorry , but it is a dealer item or a locksmith( call and make sure they can do it first). It can be done though. You have ...

...mountaineer yesterday. My key will not unlock the driver side door. It requires a code. How do I reset the code? Ed Jamison----Tulsa Ok spray a small amount of W/D 4o into the key lock and then put ...

any suggestions Security is set. Lock the car up. open it with the key and turn it on. this usually resets the security. If it doesn't use the key fob while its still on and unlock it

...locks will unlock but will not lock the doors, what part do i need to replace or check on to fix this issue? Turn your key from the off position to the on position five times. Do not start the car ...

...mountaineer. Don't have a door code for keyless entry. How can i get in? Is there a way to reset the code? most dealerships use the zip code for your area to open all keyless entry cars if you bought ...

...mountaineer. I need to know how to reset or determne the keyless code to get in. If you have the Keys to the vehicle you can get in. Giving that code out will put other vehicle at risk. If you have a ...

...mountaineer.i had been reseting computer by disconnecting battery for a hourr or so and that was working for a day or 2 but now it is just locked up in 4wd. i really want to just disengage front end ...