20 Most Recent 2007 Jeep Liberty Sport Questions & Answers

you either need to do a current draw test on every circuit or find a decent electrical mechanic. the dealer may not be one in this case.

2007 Jeep... | Answered on Feb 13, 2018

wow, seen where, radio, nav, or cluster? or?
why not say where your finger is pointing.(or eyes gander)

means someone used the passenger ejection seat.
(due to nagging mother-in-law)
over 7000 pages in the FSM, takes long time to scan this.

is this some autel scan tool bull
where it gives an odd code
then you look it up in there silly manual
and find what it really means?

i see one hit, in google for P0300 is true code
why not use a real scan tool and stop fooling about.
or ask any shop in town, no dealer needed. 99% of time.

2007 Jeep... | Answered on Nov 22, 2017

The battery could be letting you know it is about to fail.

2007 Jeep... | Answered on May 21, 2017

one click is , lamp test, mode, see operators guide on how to start your car, it tells all this lamp stuff.
Does it crank
if a/t car , you cant push start it so
automatic trans, cars, tell what you have for drivetrain

first learn 2 word
cranks ok
but does not start
or will not crank

mine push starts and gravity hill starts, but is and M./t stick shifted
i can start my car 3 ways. see?
done so vast time.

tell what happens as you turn the key
head lamps are bright right>
i turn the key the starter is silent.
and i try to crank in neutral as the operators guide directs you and it does what?

2007 Jeep... | Answered on Mar 21, 2017

The battery light symbol lit on the instrument cluster , under 12volts at the battery with the engine running .

2007 Jeep... | Answered on Oct 12, 2016

learn to test them all, using a meter? or look at them?
or post the exact light dead, you did not.
the cab of the car and dash, etc is ****-a-block full of lamps.
must we guess, ?
post a photo of one lamp dead, and BINGO, 1000s words in 1nanosecond, is this too hard?
yes we can but , no we cant with out photos or using real names of a lamp.
console, do you mean the shift console, or the console box light.
Illum.? those lamps on the shifter run off of cab dimmable park circuity, turn on park and they all glow,.
if only one dimmable lamp fails of the 10 or more in the cab.
then its burned out, or the connector to it is rusty.

2007 Jeep... | Answered on Oct 01, 2016

may need drive shaft universal joint bearings.... if clunking is that bad it needs to be replace soon.... can be extremely dangerous if it comes apart.

2007 Jeep... | Answered on Jun 26, 2016

good luck


2007 Jeep... | Answered on Jun 25, 2016

May be no gas.

2007 Jeep... | Answered on Mar 12, 2016

which engine? is traNS AUTOMATIC OR STICk?
hot or cold? or both (engine temp)
is transmission slipping? (if stick clutch slip)
(eg: engine rpm races, and speed dont increase) called slip.
is it slipping?
or is engine misfiring? (tune up, times skipped?)
or is engine bogging, (feels like dragging 10,000 pounds)?
the engine light means, (get car serviced now)
or if savvy and a DIY person, it means SCAN it now.
easy huh>?

its trying to talk to you, so listen to it and scan it.
then post the DTC errors.
keep in mind we are deaf and blind here. so miss 99% of all key facts, and evidence on car. that your living mechanic sees , feels and hears.,
so dont expect magic here, there will never be that, here.

2007 Jeep... | Answered on Sep 08, 2015

get the brakes serviced first.
neither of those work with bad brakes.
check fuses 1st.
then scan it, scan the ABS. see DTC codes,
if it says a sensor is dead. well it is..
each code has different meanings and further tests.
but we check that the brakes work.first.

imagine if you will, trying to fix cruise control with a dead engine.

2007 Jeep... | Answered on May 23, 2015

stuck or bad door switch.
on 07 any scan tooll will tell you which is bad.
scan it.
the DTC error will report this.
the fsm covers all this. read it? or get car serviced,

KJ car

2007 Jeep... | Answered on Mar 19, 2015

Could be a simple fix. Take off the door card (the inside trim bit of the door. You will probably find the link rod or cable from the interior handle to the lock mechanism has popped off. Some are held on with a clip, so if that is missing, you may need a new clip.

2007 Jeep... | Answered on Mar 08, 2015

scan it, yet, that is first (after checking fuses)
scan it see whats up. and for sure 2007+ jeeps. big time.
the check engine light is on (oBD2 check light?)

we cant do noise here.
but you can find the location, nothing else matters, the spot that makes noise.

what did you do, did you select 4wd or what?

The Liberty is available with either a part-time Command-Trac or full-time Selec-Trac transfer case.

if yes, which system do you have, we cant guess any of this.

2007 Jeep... | Answered on Feb 20, 2015

English please.

2007 Jeep... | Answered on Oct 20, 2014

Not finding what you are looking for?
2007 Jeep Liberty Sport Logo

299 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2002 Jeep Liberty
2002 Jeep Liberty

1,622 Questions

2005 Jeep Liberty
2005 Jeep Liberty

825 Questions

2003 Jeep Liberty
2003 Jeep Liberty

746 Questions

2004 Jeep Liberty
2004 Jeep Liberty

719 Questions

2006 Jeep Liberty
2006 Jeep Liberty

621 Questions

Top Jeep Experts


Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Liberty Jeep

  • Liberty Jeep

Most Popular Question

2007 jeep liberty accelerate past 10 mph

  • Cars & Trucks