2005 Jeep Liberty "transmission light" Questions

...transmission light turned on what could be the issue? That light indicates that your transmission needs attention. Drive to any transmission shop where they will check it out and make whatever ...

...light, check the codes? I know this is "limp mode". YOU NEED TO HAVE TRANSMISSION CONTROL SYSTEM SCANNED..IT HAS DETECTED A PROBLEM IN THE ELECTRICAL SYSTEM,INTERNAL OF TRANS OR A SENSOR FOR ...

transmission light came on the While driving, the transmission light came on the dashboard. I checked the fluid and found it was a half quart low. After adding the fluid the light did not go off. HELP

...light came on and ****** slipping No,You need a rebuilt or new transmission,I see this in alot of Jeeps,Even if you maintained the transmission fluid and drove carefully,the transmission itself is ...

p1764 means that the sensor could be bad on transmission, it is manufacturer control transmission, fix the speed sensor and then maybe the light will go out for transmission sensor. best of luck carl

...light on Transmission light came on drives fine not slipping fluid good it was just recently changed in the last month along with filter why not scan the PCM it reports all trans TCM errors. scan it, ...

...the problem is if your transmission shifts normal is the instrument cluster . if you have check engine light and the transmission shift late or drive on single gear is the sensor on the

...light is in with codes p0731 & p0732 incorrect ratio, what does this mean?? It means that the transmission is not seeing the right values between the input and output speed sensors. Is the ...

...light up anymore. These are LED lights and almost never burn out.I would suspect that the mode switch in the transmission is bad and causing the problem.Could also be a bad connection at the ...

...light, it stalls. It also seems that the car does not want to go into a 3rd gear, though the car is automatic. The mileage and speedometer have stopped. I have had a couple of things suggested to me ...