2002 Ford Ranger Regular Cab "4x4 front" Questions

...front locking hub on 4x4 ford truck wont lock in I had like a bearing noise coming from my left front wheel one day,after that when I needed 4x4, I locked in the hubs but I only have rear wheel ...

4x4 front wheel hub 4x4, 4L, front wheel hub torque specs. Do not put more then 100 psi. It likely depends on the type of four wheel drive system you have. If your system is live axle then it's 162 lb

I have the wrong rear end gears in my 94 ford ranger xl 3.0 4x4 5- speed what gears do I need to make the 4x4 work? You need to know what the fronts are. Were the rear gears changed?

...4x4 button, as you drive there is a bang sound from the front end, sounds like the drivers side where the noise is coming from, Under no load not so noticeable. Universals seem fine, could it be from ...

...4x4 don't use vacuum. the front is auto lock when the transfer is engauged with the button. if the light don't which when pressed into 4hi or 4low. the motor on the transfer case maybe hung up. they ...

...4x4 Front Axle hubs will not engage I have a 98 Ranger 4X4. The front hubs will no longer engage, the transfer case is engageing, and the front axles still turn, but the wheels do not. I have had it ...

...4x4. has rumble at about 55 mph. seems to come from front. ranger was wrecked on passenger front. replaced tie rod end, wheel, and steering box. rumble seems to come from the front. it is very common ...

4x4 when you turn the switch you can here it click in but its not engageing the front axle any one know what to do? ck frt drive shaft out of trans-fer case is turning if it is ck both hubs on outside

...4x4 it takes a minute to return to 2 wheel drive sounds like the transfer unit is going bad check level of oil in the case if burnt then you know what it is if ,it's not burnt check the front axel to ...

...4x4 The truck has push button for four wheel drive and when pushing the button it sounds like its working but it will no ingage the front tires. check to see if the drive shaft is turning if so the ...