2005 Mitsubishi Lancer "alternator belt" Questions

alternator belt Locate the two belts on the left side (passenger side) of your Mitsubishi Lancer. The outer belt is a serpentine belt, operating four pulleys and the inner belt is your alternator belt

...alternator belt. 2 Follow the serpentine (outer) belt to the three pulleys lined up vertically near the front of the engine compartment. Locate the middle pulley, which is the tension pulley for the ...

...alternator belt The alternator is held in place by two bolts. Top and bottom bolts - 12 mill bolts. By loosening the bolts (especially the top bolt) you will find that the alternator can be ...

...alternator belt on my 02 mitsubishi lancer? The alternator is held in place by two bolts. Top and bottom bolts - 12 mill bolts. By loosening the bolts (especially the top bolt) you will find that the ...

...alternator belt snapped. I have successfully removed the serpentine belt but im not sure how to loosen the tension on the alternator to install the new alternator belt. Please help! I diagram or an ...

...belt off the alternator pulley. Unbolt the electrical connections on the alternator with an open-end wrench or a 3/8-inch ratchet and socket depending on accessibility. Unbolt the water pump pulleys ...

alternator belt on my 02 Lancer and was smart enough to get the tightening sequence wrong and broke the long tensioner bolt... I was lucky to get it tight first but how do I find that bolt. To work on

...belt for the alternator and i still marking no charge not 100% sure but sounds like you need a new altenator. some local parts stores offer free alternator testing, maybe have them test it to make ...

...to recharge battery. Where is the location of the alternator fuse? can you show me the picture? check the fuse for the alternator including electrical connections. check the alternator belt.

...alternator belt. I was wondering if anyone knows how or has a diagram? To move the alternator you have to loosen the bolt that holds the bottom of the alternator. Then loosen the bolt on the block ...