Question about Hoover Vacuums
belts are slitting and small back is burning will move now but belt is smoking and burning. ? you probably need to replace your brushroll seeing that your belt is burning means motor is turning. first
...belts burning and the brush not turning? Replaced with the first belt and as soon as I turned on the vacuum it smelled like burning rubber. That belt broke and now I have replaced it with second belt ...
the rod that the brush spins around, clean the ends and add some WD40, being sure not to get it on the belt. This should remedy the problem of the belts burning as long as the belt is put on correctly
Belts Burning On our Ultimate G, belts are lasting about 2 uses and they smell and burn off. I am looking at the roller and I can see a slight grove where the belt rides. Is it time for a new roller. ...
Burning rubber smell when the vacuum is on. I have a Kirby the Ulitimate G vacuum. It works fine but it gives burning rubber smell. Can anyone tell me what's wrong with it. I tried to open it but none
hoover mach 4 burning smell There are two reason you could be smelling a burning smell- 1. The belt is too stretched out and needs to be replaced. This causes it to slip when the vacuum is on and will
belt is burning? when ever I start the vacuum for about 30 seconds I smell something burning. It smells like a rubber burn, such as the belt. I'm trying to fix this but I don't know where the belt is ...
work well but smell like a burning belt If it smells like burning rubber, the belt is probably worn and slipping. If it's another burning smell, your motor windings are probably shorting and will burn
I have a kenmore grab n go bagless and I need to know the exact size of the belt, I lost the manual, and I have burn several belts at the bigining of the problem the motor stops and burn the belts I ...
13 questions posted
Usually answered in minutes!
151 Questions
65 Questions
59 Questions
44 Questions