World Office Products Papermate PM-1550CD Shredder "paper motor" Questions

...paper; motor sounds noisy and will not stop until off button is pressed. Try running the shredder in reverse and oiling the blades. More help with paper shredder oil here: ...

...motor/cutter compartment after unscrewing it. Nothing obvious such as pieces broken off or 'stuck' paper. - Should the cutting rolls move, or how can one move them to check areas not easily visible ...

...paper the motor runs but machine does not accept paper it must be a switch that percive papers. just in front of the where you giving paper. Is this a commercial shredder or a home unit ? Do the ...

...motor circuit. Over time paper dust gathers on this sensor, covering it completely and fooling the machine to think that there is ALWAYS a piece of paper being fed into the shredder, the result being ...

...paper and now the motor runs, but not the blades. They do not turn in auto, forward or reverse. Any ideas on repairing this problem? Thank YOU!! yes, it's the plastic gear that's shredded in this ...

...paper that was stuck between the cutter rollers. It makes stalled-motor noises when I try to make it run, both forward and reverse. I can turn the motor by hand a little using the fan on the motor ...

...motor runs but won't shred paper. No Royal VF1000 - Shredder motor runs but won't shred paper. No apparent paper blockages. What to do? If the motor is running do the cutting shafts turn??? if not ...

...the switch. The motor should not turn on automatically when repositioning the switch. Reposition the switch so the light is on, but the motor does not run. Then try to put in paper. I hope this

motor response , put a piece of paper in then it started up but would not stop after the paper was shredded. Try cleaning the "eyes" in the middle of the paper slot...they just may be dusty with paper

...paper, the steel motor gear will grind the teeth right off the plastic gear and it won't spin anymore. If your motor sounds like it's bound, then the good news is that the gears aren't stripped. ...