Technics SL-1210 Turntable "channel amplifier working" Questions

Turntable with built-in preamp won't play on phono channel on technics sadx950, but fine on CD channel. Is phono channel dead? A turntable with a built-in preamp should not be connected to the phono ...

...channel of the mixer. Tried all channeles and still got a problem? Try another mixer as the master output of the mixer could be faulty. Still a problem? Try your mixer in to another input of the same ...

...amplifier I have to turn the volume to max. Even then only one of the speakers is working, while the other just makes a buzzing noise. Any suggestions? I hope you have it connected to the Phono input ...

...channel input of the amplifier. Sound very distorted. Even getting some distortion noise when no record is playing. This turntable has a preamp switch on it, which is probably on and what is causing ...

...amp and trace back from the phono socket you should find the pre-amp. If it is distorting on both channels it's probably an IC that has

...amplifier isnt at fault and nethier is the amp speaker channel and neither is the speaker) but when i use the aux and input my mixer it ceases to produce any sound at all. the mixer is brand new and ...

channel is bad, provided that you know absolutely that the amplifier does not have a problem. If you have another amp you should first try it to make sure that the amp is not the problem. When you are

...working (I already checked the turntable and cable itself by playing back he same track with both stereo channels through my amplifier). You can either get the item replaced if its still under ...

...the intentions of mixing, so you gonna need a mixer. MIXER & DECKS SET UP: 1.decks into phono channels 1&2 2. black GROUND wires, go to GND screw on back of mixer 3. RCA master / booth ...

...channel cables from the turntable to the Preamp/Amplifier. If the sound switches channels in your headphones then the cartridge or the cables from the cartridge to the preamp in the turntable have a ...