Technics SL-1210 Turntable "pin plug" Questions

...Just set up new turntable AT-PL50. Connected red pin plug to right channel and white pin-plug to left channel input of the amplifier. Sound very distorted. Your query incomplete. Please

pin-plug to the right channel input and the white pin-plug to the left channel input of the amplifier. Seem to be getting noise when nothing is playing, and sound very distorted when record is playing

pin of left output plug BLUE - to outer metal rim of left output plug In some cases this wire may be black Just to recap, if these readings are OK - the cartridge may be at fault. I wish you well with

...pin-plug to the right channel input and the white pin-plug to the left channel input of the amplifier. Sound very distorted. Even getting some distortion noise when no record is playing. This ...

sound problem Don't know if anyone here can help me but. I have a pair of technics 1210 mk2s, and there only playing through the left channel. So the sound output through my amp only comes through my ...

...pin plug marked "System control" I assumed this was only for using it with a Sony product but do I need to connect this too? There are also 2 ordinary phono plugs wich will be connected to the ...

...plug pin adapter and plugged it into the mains. I then had a turntable desk made for my turntables and decided to replace the plug end of the 1210 from the US version to the UK version and wired the ...

...plug also, if its the old 2 pin moulded, change it for a new one 3 pin etc If not there in the power supply itself is dodge and have to go in to someone. Should be 2 much of a big deal, but get a ...

...stops sound, Everything still working good but the sound Check your rca plugs if the center pin is loose time to replace also you can check the lines using a voltage meter for continuity in ...

...and left ground is green and right ground is black.the collar that screws on to the head unit has 4 pins.make sure the contacts are clean.measure the wires one at a time from the tone arm to the rca ...