Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum "water leaks pump" Questions

Ad

Water pump breakdown for bissel crosswave Water pump assembly for bissel crosswave The water pump in a Bissell CrossWave is a vital component that is responsible for pumping water from the tank and ...

Ad

...water still leaks out, how can I solve the problem. Leaking from where? The jets up front? If so you need to replace the electrical water control valve. Visit http:www.Michco.com to get a new one or ...

Ad

...Leaks from the bottom? When unit is on it leak from the bottom. Water (cleaning solution) is gravity fed to the floor cleaning brushes, but the attachment hose is fed from a small pump. If it only ...

...leaks water and detergent. The leak is coming from the knob/spring. Poor design. It's been leaking almost from day 1. SOLVED: Hoover spin scrub 50 leaking from bottom - Fixya https://www.fixya.com > ...

...water pump assembly in the base of the unit. The pump assembly is made of very cheap abs plastic and is held together by clips. Mine was leaking all along one side of the assembly. Good news is that ...

water leaks from the valves underneath the tank. If either of the valves are leaking the clean water tank will need to be replaced. To order a replacement tank follow this link > Search Results. If

fittings, valves, jets, etc. in addition to the pump and heater that all a possible source of your water leak. You must inspect and test all these areas thoroughly to diagnose the source of your leak

...water leaks from bottom of ProHeat 2x Water dripping from bottom near wheels (looks like black grease or oil mixed with it). Happens after run soap/water dispenser for several seconds. It is not just ...

Question about Bissell Vacuums

3 Answers

leaks. The pump wants to pump water with high mass and not air. Once the air purges, it will build pressure. You can watch the lines with the top open and identify where the air is coming from. 90% of

...water tank out and look on the bottom for a fitting that screws on make sure its tight.also inside of that fitting trhere should be a washer or an oring to keep it from leaking.if thats not the ...

Not finding what you are looking for?
Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum Logo

322 questions posted

Ask a Question

Usually answered in minutes!

Top Bissell Vacuums Experts

Brad Brown

Level 3 Expert

19187 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Renee Knafel-Bullock

Level 3 Expert

404 Answers

Are you a Bissell Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...