Sharp AR-5316 Advanced Digital Imager Copier "sim detected" Questions

...toshiba e studio 161 L6 indicates Polygon motor lock detection where it does not rotate. U can use SIM 61-1 to check the polygon motor operation or not, and the connector/wire harness. If confirm

...detected for 1sec during rotation of the polygon motor. Cause : Polygon motor unit abnormality Improper connection or disconnection of the polygon motor and the harness. MCU PWB abnormality Check and ...

...Scanner wire disconnection Origin detection sensor abnormality Mirror motor harness abnormality Use SIM 1-1 to check the mirror reciprocating operations. When the mirror does not return. Check for ...

...wire disconnectionOrigin detection sensor abnormalityMirror motor harness abnormality Use SIM 1-1 to check the mirror reciprocatingoperations. When the mirror does not move Check for ...

not stabile for 2 sec or more. Detection begins 1 sec after motor drive ON signal is output. 1) Run sim U030 (fixing motor) to check for drive problems, 2) Reseat YC27 @ engine PWB and motor connector

...Heater lamp abnormality Thermostat abnormality Control PWB abnormality Check and remedy Use SIM 5-02 to check the heater lamp blinking operation. When the lamp blinks normally. Check the ...

...Heater lamp abnormality Thermostat abnormality Control PWB abnormality Check and remedy Use SIM 5-02 to check the heater lamp blinking operation. When the lamp blinks normally. Check the ...

...detected for 1sec during rotation of the polygon motor. Cause: Polygon motor unit abnormality Improper connection or disconnection of the polygon motor and the harness. MCU PWB abnormality Check and ...

i am getting 4 and H display H4 indicates heat lower low temperature detection. U need to perform checking on thermistor, heater lamp. If everything ok, u can use SIM-14 to clear the message.

...etc.). Check POD1 sensor harness. Check the fusing unit installation. Cancel the trouble with SIM