Samsung SyncMaster 540N 15" LCD Monitor "remove back" Questions

...SyncMaster 753s? Where to pull, where to press etc? Thanks! there is 2 lock on front side first remove back side lock or scrow then insert small pin pull up back cover your monitor will get open ...

remove the back of Samsung 932MW/GW I need to remove the back of my SM932MW but can't quite work out how to do it. I have a loose speaker which I need to fix and need to get into the back to fix it. I

...remove graphics (video) card from the pci slot 6. clean contact points of video card using a clean rubber eraser 7. wipe contact points with clean cloth 8. install the video card back into the pci ...

...remove the back of Samsung 940MW LCD TV How does one remove the back of a Samsung 940MW. I think I need to replace some caps in the power supply. I removed a total of 7 screws (4 of which attach the ...

...remove back cover.Your now looking at the back of the board housing. The ribon is simple, on the panel end of the ribon, squeez the outer clips together and slide it away against the panel..The ...

...Remove the back cover: Remove the 4 screws that supports the stand and slide it out the bottom. Remove the 3 screws along the bottom of the back plate Use a small flat blade screwdriver or plastic ...

...Remove the back half of the case. It does not connect to anything inside the monitor, so it can be removed completely. Remove the pedestal by unscrewing the wing-screw on the bottom, This allows good ...

...remove the back cover from a Samsung 753 DFX CRT monitor? I removed the 2 screws but I cannot see how the top of the cover is attached. Along the top of the monitor cover you can two narrow slots , ...

...remove back cover.Your now looking at the back of the board housing. The ribon is simple, on the panel end of the ribon, squeez the outer clips together and slide it away against the panel..The ...

...remove back cover of monitor Hello all, I have a Samsung SyncMaster 550s monitor which is pretty old and requires a cleaning. I can feel that its inside is heavily loaded with dust. So I've got to ...