Konica Minolta bizhub 350 All-In-One Laser Printer "install transfer belt cleaner" Questions

transfer belt , what should we do now ??? C13C8   A new installation is not detected when a new Transfer Cleaner Unit (Image Transfer Belt Unit) is installed.When a new transfer belt unit is

...when a new Transfer Cleaner Unit (Image Transfer Belt Unit) is installed. for the solution, SM says you should try refitting Transfer Cleaner Unit(misplacing could occur) or change the PWB-M

bizhab c350 c13c8 A new installation is not detected when a new Transfer Cleaner Unit (Image Transfer Belt Unit) is installed. Did you get some 3rd party transfer belt get a OEM and replace it.

...transfer belt. Then right below the fusing unit right where the edge of the transfer belt is located when normal installed right below where the edge of the belt would be. Are two sensors they are ...

...transfer belt in the machine, on starting the machine it came up with a message 'serial number needs to be entered, contact service representative' after that screen the error screen came up 'an ...

belt transfer (m24)? Thank you for your answer 1. Remove IBT Belt Assembly (REP 9.15). 2. Remove IBT Cleaner Assembly (REP 9.16). 3. Remove Stand Plate (Figure 1). a. Remove screw (2). b. Remove Stand

Konica Minolta c7000 error c2840 idc sensor error. Gamma Correction abnormility check and re-install process units check Transfer belt cleaner and idc windows open properly.

transfer belt errors I keep getting 2 error messages:"transfer belt error" & "lever unlocking error". I can'[t seem to clear them. I saw this posted somewhere on the internet and it worked for me. ...

transfer belt cleaner" - can this be done easily, or am I looking at someone coming in to do this? Thanks! After normal start up press and hold 9 and the # key together after a few seconds it will ask