code f28 Hi, the error code F28 means one or both of these parts are bad. Motor Control Unit (8540135) Microcomputer Machine Control Unit (8540788) It would be a good idea to order both, as both ...
...F28 code. I unplugged it for 5 minutes and it still will not run a cycle without stopping with a flashing F28 code. The error code F28 means one or both of these parts are bad. Motor Control Unit ...
...F28 error code means - SERIAL COMMUNICATIONS ERROR/MOTOR CONTROL UNIT ERROR. Caused by either a communications problem between the Central Control Unit and Motor Control Unit, or Motor Control Unit ...
Question about Whirlpool duet Washing Machines
...F28 code on a whirlpool duet washer What id a F28 code on a whirlpool duet washer mean? Can be the machine control or the motor control here is a link to the Repair manual.... ...
Question about Whirlpool duet Washing Machines
...code F28 = Serial Communication Error. Error codes can be caused by a Power Surge or other electrical anomaly,attempt to return the washer to operation by following the Hard Reset procedure below. In ...
...F28 error mean anyway? I tried calling whirlpool to see if they could help me and they just said to select the drain/spin cycle and the door will unlock; well it didn't. Nothing seems to work and its ...
F28 CODE The error code F28 means one or both of these parts are bad. Motor Control Unit (8540135) Microcomputer Machine Control Unit (8540788) It would be a good idea to order both, as both ...
Question about Whirlpool duet Washing Machines
...code and F28. The SUD message relates to overdose of detergent detected during the Wash Cycle. This may signify a bad pump, an extra heavy load, excessive detergent or excessive suds. If too much ...
Question about Whirlpool duet Washing Machines
code F28 and it won;t let us go any further. What can we do and what does this code mean? F28 is a serial bus error from the CCU (Central Control Unit) to the MCU (Motor Control Unit). All you need is
...Code The F28 Error Code could Just be a Fluke But it is supposed to mean that there is no water entering so to be sure before running another load be sure hoses are connected and turned on. Thumbs up ...
11,378 questions posted
Usually answered in minutes!
187 Questions
64 Questions
34 Questions
