Question about Fisher and Paykel Washing Machines
Fisher and paykel wl80t65d is showing code 240. The first four lights.What is code 240? This video will help for error codes 240, 130 and 131 https://www.youtube.com/watch?v=pUrtHJ-1kPI
Question about Fisher Washing Machines
...error 240? During the spin cycle, i got Error 66 (01000010) pressure Transducer Out of Range. When restarting I can hear it start to spin and then stop. I've recently replaced the main board, drain ...
...Error code 240 or error code 350 shows on washing machine. Whichever code, machine stops, drains and nothing else happens until switch off and start again - sometimes completes wash, sometime repeats ...
Question about Whirlpool Washing Machines
...the same 240 seconds the error code will be displayed once more. Check all wiring and connectors between the main controller and the door lock Check main control unit, probably requires to be ...
...240 w2hat does that mean check in the manual for the error code most of washing machine if the error code is in users manual its means its only minor problem,but if the error code is not in users ...
...error 240 (111000) is in likelihood of issue: 1) cable harness corrosion @ Rotor Position Sensor or harness @ motor control module; 2) bad RPS , or 3) bad MCM. THere are some good YouTube videos ...
Question about Fisher and Paykel Washing Machines
...240. (11110000) Hall Out Of Order. RPS Fault Same as previous Hall Error faults See fault code130 for directions. 130. (10000010) Single Rotor Position Sensor Error The Motor Control Module has found ...
...240. (11110000) Hall Out Of Order. RPS Fault Same as previous Hall Error faults See fault code130 for directions. 130. (10000010) Single Rotor Position Sensor Error The Motor Control Module has found ...
...240. (11110000) Hall Out Of Order. RPS Fault Same as previous Hall Error faults See fault code130 for directions. 130. (10000010) Single Rotor Position Sensor Error The Motor Control Module has found ...
...240. (11110000) Hall Out Of Order. RPS Fault Same as previous Hall Error faults See fault code130 for directions. 130. (10000010) Single Rotor Position Sensor Error The Motor Control Module has found ...
558 questions posted
Usually answered in minutes!
1,514 Questions
200 Questions
88 Questions
87 Questions
45 Questions