Mitsubishi WD62628 62" Projection HDTV "set tv netcommand" Questions

tv will shut off within 30 sec after again timer light blinks. Before it started doing this it had asked me to program the netcommand devise menu. I am not sure if something happened during that setup

...set the TV to get its input from the wrong Antenna. If your TV has lost memory of its DBS source, you may have to re-teach the TV (using the remote) that the DBS (Digital Broadcast Satellite) input ...

...set on the TV. The lamp is still strong after 2 years of use. There is no dust or other impediments to cooling (airflow is completely unobstructed). System reset didn't help. Hello o9lkicja, This ...

...TV set up menu and the Netcommand menus the blue screen is clear and I can go and set up the TV inputs and what not. Any suggestions? the TV is 4 years old. first try resetting and rebooting. reset = ...

...set up on the tv and the tv automatically converts to HDMI? Is this correct? Can someone assist me, I am paying Directv for HD tv that I do not have, and husband thinks we need a converter box. I am ...

...TV set from the wall for at least an hour or so. 1. Initialize settings by pressing "menu, 2, 4, 7, 0 enter" after settings have been initialized press the system reset button on the front once the ...

...set up on the tv. Check your results. If you don't see a change, begin to suspect either the lamp, color wheel or light engine. Is the TV still "bright"? If so, then you may need to do manual color ...

...TV. Then go to netcommand, review, and make sure "monlink" is checked, click next, and finish. Select "monlink" from your device manager and turn on your PS3. If the screen is blue, go to the next ...

...set on and got a solid red light on the front panel indicating a bad lamp. Tried again later in the day with the same result. I then pushed the reset button and after the reset turned the TV on with ...

...set up process but no signal and then the power on the remote stopped working. I tried the TV but after resetting it no power so I am back to before the board was repaced. Any idea what should cause ...