Mitsubishi Televison & Video - Recent Questions, Troubleshooting & Support
Tv turns on then off after a few seconds.
Try this and let me know what you find:
/* Style Definitions */
mso-padding-alt:0in 5.4pt 0in 5.4pt;
font-family:"Times New Roman";
MOST OF THESE SETS HAVE A SELF DIAGNOSTIC:
UNPLUG TV AND THEN PLUG BACK IN---TURN ON---GREEN POWER
LIGHT COMES ON FOR A MOMENT AND GOES OFF.
PRESS AND HOLD “device” and “menu” buttons on front of tv
for at least 5 seconds and then release both together.
Watch for power light to blink in a sequence:
1 blink-then 2 blinks-------no error
2 blink-then 1 blink-------X-ray protection
2 blink-then 2 blink-------SHORT PROTECTION*******
2 blink-then 3 blink---------deflection circuit problem
2 blink-then 4 blink---------vertical circuit problem
******2, then 2 is most common---usually means one of the
fuses that protect the Convergence IC or IC’s is blown---set will detect no
voltage to convergence IC and shut down.
SET WILL REPEAT BLINK ERROR CODE UP TO 5 TIMES AND THEN TO
GET IT TO REPEAT MORE YOU HAVE TO UNPLUG SET AND TRY TO TURN ON AGAIN.
IF IT IS 2 AND THEN 2---USUALLY
CONVERGENCE CIRCUIT PROBLEM
let me know what you find--hope that you find 2 blinks, a pause and two blinks--this is the most common and easiest to fix.
if this has helped you rate this solution as I do this here for free.
3 hours ago
I have a 65" 1080P Mitsubishi DLP TV, red lamp light is on, turn TV on, it will stay on for 30 seconds with a beautiful picture, then shut off!
I fixed your space bar issue for you
Lamp needs changing, or a cooling fan issue
Help: Mits DLP Red Lamp Light - On Solid random times ...
www.avsforum.com > forum > 63-rear-projection-units > 1354840-he...
Aug 18, 2011 - Did you get the lamp from Mitsubishi? ... If you receive a Solid Red LED indicator on the front of your HDTV you should first unplug the AC Cord ...
Mitsubishi 65737 Red Light, No Image - AVS Forum ' Home ...
Aug. 20, 2009
Mitsubishi WD-65C9 constant red status light - AVS Forum ...
May 28, 2013
Mitsubishi WD-60735 Red Status Light - AVS Forum ' Home ...
Aug. 7, 2017
Mitsubishi WD-65C9 Status Light Blinking Red - AVS Forum ...
Jun. 20, 2011
More results from www.avsforum.com
Mitsubishi TV Shutdown Troubleshooting - Stereo & Video ...
www.stereoandvideorepairco.com > Troubleshooting > MitsubishiShu...
Blinking red light, Fan has stopped. Find and replace the bad fan. Solid red LAMP light, Lamp has failed. (DLP TV's), Replace the lamp. Solid red STATUS light ...
on Apr 09, 2020
Not finding what you are looking for?