Fisher and Paykel Fisher & Paykel Washer "temperature light flashing" Questions

...light is flashing 3 times, with a slight pause, followed by flashing a further 3 times, or if it is didplaying F03 you have an error code that is explained as follows - NTC fault - check Thermistor ...

Wont start... all temperature lights flash and the Prewash,rise,time save, crease care lights flash too I cant make it start but all the warning lights flash except for the spin lights. It last ...

...flashing in the centre. see this causes and fix it. God bless youF05 Water temperature sensor error If during the water heating step in the wash cycle, the water temperature sensor (NTC) value is out ...

Frigidaire affinity front load washer fills with hot water only. The temperature button on the front when pressed all the lights flash on the temperature cycle. control board issue, technician will ...

...flashing washer has stoped Hi Thanks for using FixYa. F24 is a water temperature sensor error which is caused when the water temp. sensor value is out of range during the water heating step of the ...

...light flashing. Replaced carbon brushes. Machine needs kick start or ??? Replaced carbon brushes because they were blackened. carbon brushes r black as, well, carbon. They need replacing when they r ...

...through a cycle, leaving clothes wet, now wont start a new cycle. After a couple of seconds the temperature lights and option lights all flash. Try a power reset. Turn off at power point for at ...

...led light is flashing right above the play/pause button and machine not started and it keep flashing What Make and Model # is it. Really impossible for FIXYA Folks to help with out that

...temperature, it seems that this light indicates a heating ciruit problem. The next step is to check continuity of heating element. These are readily available from meile and other suppliers/ aution ...

...light flashing f-13 F13 indicates High Dryer Temperature. Check the dryer motor runs OK and that the fan isn't hanging off. (You'll hear it if it is). Check the connections to the dryer NTC ...