Hoover H120M Front Load Washer / Dryer "washing machine motor action" Questions

...washing machine error 1: Primary Source: Motor control module. Action: Replace motor control module. 3 - Motor control module fault: Fisher and Paykel washing machine error 3: Primary Source: Motor ...

washing machine which dropped out of my van while moving house the problem is there no motor action, i had someone look at it he changed the pcb module board, motor and pre Everything else seems to be

washing machine makes clicking noise after filling up and wont spin. Kepps on clicking until i force shutdown, which then drains the water away. hi, the problem you have is the motor carbons (brushes)

...washing machine is acting up, and the actions to take. 1. Diverter valve Action - Check diverter valve continuity. If open circuit, replace diverter valve. 2. Motor Controller Board (drive circuitry ...

...Machine will not start washing . It beeps and lights one and seven are on. Also the lid no longer locks. Can the lid lock be bypassed? Your lid will not lock will this Error code. 130. (10000010) ...

...what you mean? if you have normal wash action then it is agitating in the wash cycle. Otherwise if it doesn't agitate or spin but does fill with water then your motor or motor control board is

washing machine Does anyone know what is the error E47 about on a Bosch washing machine wan28120? I found 2 clues on internet about an issue with the thermostat and an issue with the motor controller.

machine has been fitted 136. (10001000) Motor Stall The Motor Control Module has been unable to start the motor. Possible causes of this fault are: Faulty motor harness, faulty or jammed motor, seized

...washing machine error In the diagnostic mode led lights 1 and 5 and on, what does this mean That is fault code 136 136. (10001000) Motor Stall The Motor Control Module has been unable to start the ...