HP OfficeJet k60xi InkJet Printer "scanner control software detected error" Questions

...scanner bed. NOTE: For Windows users, the HP Image Zone software opens on the computer, and the HP Instant Share tab displays. A thumbnail of the scanned image will display in the Selection Tray. For ...

...scanner Step one: Check the All-in-One, the USB cable, and the connection You must use a USB cable that is less than five meters (16 feet five inches) in length to connect All-in-One products. Do not ...

...with it? windows installe it as a scanner that you can use from Control Panel->scanner and cameras following the wizard... to use the buttons on the scanner you must install software and configure ...

...scanner control panel, and to open Photoshop if I 'Scan to File' on the scanner. Works fine either way, just make sure you choose the right dpi setting to suit your needs. Hope this helps somebody ...

...control panel, and then re-install the software for the printer. It did take us quite a while to figure it out, but our printer/laptop/internet wifi network now seems to work, bug free!! Good

...software error E732 scanner communication error E733 printer communication error E740 Ether board error E743 DDI communication error E744 language file/boot ROM error E745 TokenRing board error E746 ...

scanner back? Hi, I understand that you are unable to scan from computer as well as from the printer front panel. The issue that you are experiencing might be with the USB drivers unable to detect the

...SCANNER OR CAMERA. 3. Choose COLOR PICTURE. 4. Scan. If it does not work, it is possible your Windows Image Acquisition (WIA) service is not started. To restart this process please follow the steps ...

...Scanner then update driver 3. Select the option that says AUTOMATIC and it will try to detect the driver that you've installed, if it is successfulm it'll copy the files necessary and after that the ...

...Scanner settings in Control Panel. Go to Control Panel > Printers & Faxes. Right click on your printer > Properties > Ports tab. Click Add Port and select Standard TCP/IP Port. Click New ...