Question about HP LaserJet Office Equipment & Supplies
configuration page. NOTE Before upgrading the firmware, make sure that the MFP is not in Sleep mode. Also make sure that any error messages are cleared from the control-panel display. 2 Open an MS-DOS
...sent directly to the printer with a COPY command from a command prompt or DOS window: copy /b FILENAME PORTNAME where FILENAME is the name of the .RFU file and PORTNAME is the name of the appropriate ...
sent, the printers seem to get confused and still try to print the single side as a duplex, thus the single side is actually printed on the reverse and upside-down on a sheet of paper. Has anyone seen
Question about HP LaserJet Office Equipment & Supplies
...updated. Some of the printing programs have changed and your printers software may be behind, also keep in mind that the printer software itself may be corrupted itself and just need reinstalled. The ...
Question about HP LaserJet Office Equipment & Supplies
...Fix/Enhancement: Corrects a scan file configuration problem which causes scan files to be sent to a nonexistent ...
Question about HP LaserJet Office Equipment & Supplies
...sent? If so, it may have changed IP Address from the time you first install the Printer on Windows. Check the Ports setting of the c350 printer! e.g. Network Pritners should have Static IP ...
...configuration problems. Fax machines are analog devices and cannot be used on a digital phone service such as those used in many businesses (PBX systems). Install an analog phone line for a fax ...
...configuration problems. Fax machines are analog devices and cannot be used on a digital phone service such as those used in many businesses (PBX systems). Install an analog phone line for a fax ...
...configuration problems. Fax machines are analog devices and cannot be used on a digital phone service such as those used in many businesses (PBX systems). Install an analog phone line for a fax ...
Question about Tally Office Equipment & Supplies
...updated printer firmware. Step 1. Power up the printer normally and print out a Configuration Report. This will give you a hard copy of the printer setup. You will need this to restore any parameters ...
314 questions posted
Usually answered in minutes!
1,429 Questions
1,001 Questions
724 Questions
663 Questions
593 Questions