Question about Canon MultiPASS Office Equipment & Supplies
paper tray. stops midway. Check for jamsMake sure all rollers are rolling and feedingMake sure you using the manufacture required paper weight.If none of the above applies to your issue you might have
receiving), when I pulled the paper it tore and some of the paper remained inside the printer. How can I get at the internal part of feed mechanism to remove. check the bottom part see if you can open
Question about Canon MultiPASS Office Equipment & Supplies
view screen says check paper size and wont let me do any thing other that unplug it Make sure the paper size in the printer driver and the paper size of the document you want to print is the same.
Question about Canon MultiPASS Office Equipment & Supplies
...there is an axis which broke.You need to replace the Purge Unit. This usually means chek printer for paper jam. Open doors, check the paper path thoroughly for pieces of paper, close and try
Question about Canon MultiPASS Office Equipment & Supplies
...says clear paper jam and press set, I do not see any paper jam?!?!? I unplugged power and it says same message, will not print i know that happens to me check that everything it as it sould and ...
...paper as it feeds through and try to determine where the jam is occurring. 5. Check to see if all the rollers are turning. If all the rollers are turning, there may be something in the feed path that ...
Question about Canon MultiPASS Office Equipment & Supplies
...paper jam. Check to see that the paper is properly loaded and that there is no paper stuck anywhere in the paper path. Refer to the manual for better guidance on where to look and how to clear it. ...
...paper. (Check the paper edge sensor is OFF.) (2) Press the [OK] key. (3) Reinstall the printhead. (4) Turn the power off and on. (5) Check the service error code and refer to an appropriate
Question about Canon MultiPASS Office Equipment & Supplies
...check the bottom for any paper scraps, wipe gently on a damp paper towel. If after cleaning you still get partial blue, you will need a new printhead. The part number is stamped on the side of the ...
..."check printer" and then "##345" 345 says paper jam or printhead problem, press continue, remove any jammed paper, try re- installing the printhead, the error is an internal communication
137 questions posted
Usually answered in minutes!
427 Questions
315 Questions
111 Questions
109 Questions
81 Questions