20 Most Recent Canon MultiPASS MP370 All-In-One InkJet Printer Questions & Answers

perform the setup once again since all previous data/setting has been lost when the battery was disconnected

Canon MultiPASS... | Answered on Apr 10, 2014

1.Parts are available exclusively by calling the Canon customer..To order an internal replacement part, please call 1-800-828-4040. The hours of operation are 9:00 A.M. to 8:00 P.M. EST from Monday to Friday. When calling, speak the term "order parts" when the speech routing system asks the reason for your call. You will immediately be routed to the Parts Desk for assistance.
2.You can buy a print head for your printer from http://www.precisionroller.com/print-heads-for-canon-multipass-mp370/products.html

Canon MultiPASS... | Answered on Sep 19, 2011


Try to clean it manually by removing the ink cartridge and then clean the print head with softcloth with rubbing alcohol. Then rub again the printhead into a plain paper until ink flows. Then try to print again.

Please rate and make a comment if you find this solution very helpful and might help others as well. Post more comments if you need more help.

Regards and thank you for using Fixya !

Canon MultiPASS... | Answered on Apr 20, 2011

Yes, it is Windows 7 compatible. You can find the drivers for the printer at the link below. Just download and install the driver for your computer and the printer should be installed. If it doesn't install that way open up control panel, go to devices and printers, go to add a printer, choose local printer, use the default port and click next, choose have disk and select the drivers that you just installed, then just click next through the rest of the wizard. Just make sure you can print a test page.


Canon MultiPASS... | Answered on Apr 10, 2011

as far as I know, there's a kit for that from canon that you can buy by calling tech support.

Canon MultiPASS... | Answered on Mar 03, 2011

> have cleaned & deep cleaned the printer head,
If your printer isn't used often, the print-head is likely clogged and no amount of machine 'cleaning' will restore it to function. Your problem caused me to abandon ink-jets forever and go with a laser printer. I used to maintain inkjets and the only method that seemed to have any effect on a clogged print-head is either replacement of the head and have had limited success by soaking the print-head in household ammonia for hours and finally bought an ultrasonic cleaner and used the ammonia bath to free up clogged heads. After having serviced these turkeys for two decades, I finally tired of the necessity of cleaning print-heads for the few printing tasks I still do. The very early HP inkjets were pretty good at lasting through a few days of non-use but the technology was also much coarser than the current units. I LOVE my Samsung CLP-310; it ALWAY prints when I need it.

Canon MultiPASS... | Answered on Mar 01, 2011

You need to replace the printhead of the printer

Canon MultiPASS... | Answered on Jan 22, 2011

Not finding what you are looking for?
Canon MultiPASS MP370 All-In-One InkJet Printer Logo

102 questions posted

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

old marine
old marine

Level 3 Expert

2281 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers


Level 3 Expert

13434 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

MultiPASS Canon

  • MultiPASS Canon

Most Popular Question


  • Office Equipment & Supplies