Canon MultiPASS F60 All-In-One InkJet Printer "front back printout" Questions

...front door of printer Hold the CARTRIDGE and RESUME buttons Press POWER Release all buttons after the beeps Press CARTRIDGE once Press RESUME ++++++++++ Canon BJC-5000 1: Power off printer 2: Press ...

front access door Remove the Printheads Clean the Contact Points ( golden contacts ) If the Issue still persist, Disconnect the power Cord from back of printer, Press and hold the OK and CANCEL button

...of the ink cart from front to back. Then put them back in the printer and run an clean printhead by going to the Maintenance menu of the printer. That should help with the quality of the

...front cover (Where you put the cartridge and drum unit in) Press the Back Button Display reads "Replace Drum 1. Yes 2. No" Press the number 1 The display reads "Accepted" Close the Front Cover If you ...

...back to front. Have I pressed a wrong button or is there a problem with my printer? This is usually a setting in the printer driver. Open your Printers and Faxes from the Start menu (Windows XP), ...

...front panel (where you change the toner) and the right you will see a blue lever/handle - pull it out towards you. Now on the right side panel of the printer you will notice a little plastic panel ...

back and one inside the paper path door in front, near the top. Then when those 2 are removed you lift up and out on the cover. The encoder is on the end of the drum shaft. You can remove it and clean

...front cover. Be sure to return the sliding blue tab back to the home position next to the arrow or you will have dark streaks on your printouts. If this does not solve the problem then you will need ...

...back. No problems with the front side of printouts only back. Any ideas? YOU NEED TO REMOVE THE CARTRAGES AND THEN UNPLUG THE PRINTER. CLEAN THE INSIDE WITH RUBBING ALCOHOL AND SOME Q-TIPS.YOU HAVE ...