how do i replace the printhead The Print head is sitting in a cradle. So do not confuse the cradle with actual print head. The cradle is the one that slides left and right on the metallic rod. Do NOT ...
Question about Canon MultiPASS Office Equipment & Supplies
...after market ones with canon and still wont work On Canon machines that error means you need a new printhead, the cartridge is the printhead and not the inks. I believe that printhead is
Question about Canon MultiPASS Office Equipment & Supplies
...the wrong printer cartridge no matter what one we put in The wrong cartridge error is saying the printhead is bad and not the ink cartridges. You just need a new printhead. The confusing error ...
Question about Canon MultiPASS Office Equipment & Supplies
blue jet only printing top half of things You need to remove the inks and lift out the printhead, check the bottom for any paper scraps, wipe gently on a damp paper towel. If after cleaning you still ...
Question about Canon MultiPASS Office Equipment & Supplies
...Thanks Ranjit It is not recommended that you clean the printhead manually. You should use the printers built in printhead cleaning from the menu. If that ...
Question about Canon MultiPASS Office Equipment & Supplies
Received error message, Wrong Cartridge, and printhead is stuck all the way to the right. Can this be fixed? I tried "Additional Functions - Maintenance" to try to clean the printhead, but all I get ...
Question about Canon MultiPASS Office Equipment & Supplies
instructions to take out/reinstall printhead on Need instructions to take out/reinstall printhead on mp700 http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&fcategoryid=238&modelid
...I have cleaned the printer head. still get the 'wrong cartridge' message help.... Try reseating the printhead. Remove the ink cartridges, lift up the lock lever and then pull the printhead out at an ...
...responsible for several standard commands including cartridge status. One should replace the printhead and then followed the instructions on aligning the printhead. This solves the problem. It ...
Question about Canon MultiPASS Office Equipment & Supplies
F-80 went to print and the printhead will not move. Belt is tight and can move printhead by hand with no obstruction but when I press RESUME the printer goes through the motions but when it is time ...
494 questions posted
Usually answered in minutes!
315 Questions
121 Questions
111 Questions
109 Questions
81 Questions