Canon DR-9080C Path-Through Scanner "sensor working paper" Questions

...in the paper tray there is a paper sensor. Clean that area with a damp cloth. Keep some papers and try "count-only". It it works then sensor is okay, else, you need to check the sensor. S. Mohan, ...

...working, but the lifger will not lift up with paper on it. It then says no page found in feeder. Thanks. There is a paper sensor just under the rolers in the lifting tray. Clean the area thoroughly ...

...paper detect sensor" thinks it has paper in it, and if it doesn't have paper in it...there's a problem with the sensor. Take the tray off and inspect the sensor. Blow out around the sensor and it's ...

...working, try 'Qumatool' and give a command to lift the paper tray. If it lifts, then the problem is with a sensor under the paper lifting tray. (It may not be in HP - Home position). If the tray is ...

...paper found. what next Use Qumatool to check if all the sensors are working okay. Normally sensors dont fail, there must be a small piece of paper (like the 'dot' of pre-printed stationery) sticking ...

...it stops. when i used count only still get the same problem with A01 is pickup error. Clean the paper sensor in the paper lifting tray and try. Clean the rubber rollers also.S. Mohan, Chennai, ...

...lifts Clean the two 'black dots' in the paper tray, just under the roller. They are actually paper sensors. Try 'page counting'. If this works, the scanner is okay. If the problem still persists,

...paper tray, on the vertical metal sides, you will see a slot. there are a series of small photo sensors that look from one side to the other, and this sensor works much like an automatic garage door ...

...Nothing I've done seems to work. Can you help please? Thanks, Jerry There are quite a number of sensors in any scanner. Sometimes shreds of paper get stuck inside the scanner and create a false ...

...paper jammed in scanner - there is none yes we have blown air multiple times across/around every single sensor. Make sure the feed switch on the feed tray and eject assembly is not knocked out of ...