...colors are not balance. try printing a nozzle check first, if the nozzle check have gaps or breaks, try head cleaning, nozzle check after it so you can see if it improve or still w/ gaps, just do ...
Question about Epson Stylus Office Equipment & Supplies
...nozzle check, it would appear that you have a hardware problem within the printer. It would be unlikely that all the colors would fail at the same time due to severe head clogging. Hope this helps in ...
Question about Epson Stylus Office Equipment & Supplies
...Nozzle check feature at least 16 times and the red print does not change, but the black gets worse, then better, then does not print at all, then back to normal, but the red print never changed. What ...
Question about Epson Stylus Office Equipment & Supplies
...nozzle check. It is really easy to do both, just click where it reads "clean print heads" and "nozzle check." I'm not positive this is the solution to your problem but it is worth a try--better than ...
...you last used your printer it may take a few head cleans before the ink prints. Print a nozzle check after each clean (uses minimal ink). Also be aware each clean depletes your other carts as
colors on the nozzle check pattern, please do 3 head cleanings. compare the nozzle check pattern over the last printout. If you see improvement on the pattern, continue cleaning the printhead till you
Question about Epson Stylus Office Equipment & Supplies
...nozzle check, I keep getting Sensor Error message. Problem started from a ink build up on paper at the end of a roll causing the ink head to collect excessive ink. Cleaned heads but there still seems ...
Question about Epson Stylus Office Equipment & Supplies
colors only, and not completely. I have no error messages. I replaced all the low ink cartridges, I re-downloaded the driver, performed nozzle check, nozzle clean. Nothing. I have tried to connect the
Question about Epson Stylus Office Equipment & Supplies
...blanks...and before it completely quit, was getting untrue colors...if a certain color highlighted for font, (say green...it would be pink, etc) Make sure in your menus that you have cymk setting
Question about Epson Stylus Office Equipment & Supplies
getting printed Hi, Check the control panel for error indicators. The error light is to the left of the display and is marked "Error," it will illuminate. The error will appear on the screen and is in
504 questions posted
Usually answered in minutes!
1,911 Questions
664 Questions
510 Questions
438 Questions
438 Questions