Dyson DC07 Animal Bagless Upright Cyclonic Vacuum "vacuum suction hardly push" Questions


...push it along. And, the suction is too hard I think because it used to push easily and now I have to push really hard, even on flat carpet. Check entire length of hose, including the piece in the ...


Question about Dyson Vacuums

1 Answer

...suction is too strong, and it has been draging and really hard to push for some time now. Occasionally I won't have this problem. It is ruining my carpets because the suction is so strong. I took it ...


...suction and bypass valve seems to be loose My Dyson Animal will not hardly **** at all. I suspect it is the bypass valve on the side as it doesn't seem to seat down properly and comes off way to ...

Question about Hoover Vacuums

1 Answer

up fine, So I dont believe it is a suction issue. However, something must be wrong for it to be so hard to push! Any ideas? Check all the wheels to see if they turn freely. Perhaps one is just hung up

...vacuum has good suction but i can hardly push it across my carpet. any answers???? my kenmore upright 116 is very hard to push is your brush roller turning,that would cause it to be hard to push .the ...

...suction from the brush bar. There's a little section of curved grey pipe near the base which carries the dirt from the head up the vertical pipe at the back. This section can be removed, check there ...

Question about Dirt Devil Vacuums

1 Answer

pushes hard Check for obstructions under the suction portion of the vacuum where the roller is located. If a belt is installed, check to see if its broken. Hope this helps.

...perfectly flat on the floor while I vacuum. Or, you can turn off the brush roller (set it to "hard floor" setting). Or, tip the vacuum cleaner's front up slightly while vacuuming, to reduce

...vacuum suction up the extendable pipe, but when you pull the handle back, it should gently glide from one direction over to direct vacuum suction to the bottom plate. It's tha part which is getting ...

Question about Hoover Vacuums

2 Answers

...I don't know what model vacuum you have but if there is a way of adjusting the amount of suction; try reducing it. Otherwise, it could be the nape of the carpet. how about adjusting for carpet

Not finding what you are looking for?
Dyson DC07 Animal Bagless Upright Cyclonic Vacuum Logo

1,047 questions posted

Ask a Question

Usually answered in minutes!

Top Dyson Vacuums Experts


Level 3 Expert

2572 Answers

Nick Olsen

Level 2 Expert

196 Answers


Level 3 Expert

4369 Answers

Are you a Dyson Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides