Dyson DC07 Animal Bagless Upright Cyclonic Vacuum "brush spinning" Questions

Ad

...brush was spinning.Brush spins but not easily.It spins then stops therefore burns the belt.How can i get the brush to spin around better Kristie, I would suggest taking the brush bearings at each end ...

Ad

...spinning. Took out the spin brush attachment - the main port that the attachment plugs into is not spinning. Is this repairable? Sometimes it can be the inside rod of the brush barrel has resonated ...

Ad

Question about Oreck Vacuums

1 Answer

brush roller to see if it is spinning. Turn the vacuum over and turn it on. If the brush spins before it shuts off, you may need to check the bearings to see if any strings or hair has built up around

brush is not spinning? The carpet attachment brush is not spinning. The spin brush button when pressed is illuminated. Suction is fine. The brush is free of debris. But it is not spinning. I am having

Question about Bissell Vacuums

1 Answer

spinning brush and clean all debris from the brush and most importantly from the ends of the brush. The ends of the brush usually have two holders (square?) that hold the brush in place on the vacuum.

...spinning the bar with your thumbs. Does the brush spin freely in your hands? It should spin completely around 4-5 times on each spin. If the brush will not spin, or if you feel any resistance to it ...

...spinning, a replacement brush-block assembly may be needed. The brushes counter rotate and need each other to spin. If a single brush is falling out, the brush assembly is broken. If the whole brush ...

Question about Dirt Devil Vacuums

3 Answers

...sheered through by "motor arm" (not sure what to call it - just the opposite of the roller brush end). Motor arm is rough and sheers though the belts immediately. Can this part be replaced? ...

Dyson DC25 brush won't spin when touching the floor. If I lift it off the floor it spins, once it touches the floor it stops. Any idea what the problem is? I can think of three things that could be ...

Question about Vacuums

1 Answer

brush has quit spinning upon removal i noticed that one side of the brush was free to spin the other side that has the rectangular piece to help hold into place seems to be locked up and will not spin

Not finding what you are looking for?
Dyson DC07 Animal Bagless Upright Cyclonic Vacuum Logo

1,047 questions posted

Ask a Question

Usually answered in minutes!

Top Dyson Vacuums Experts

AskDyson
AskDyson

Level 3 Expert

2572 Answers

Nick Olsen

Level 2 Expert

196 Answers

Mike

Level 3 Expert

4369 Answers

Are you a Dyson Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...