Onkyo Tx-sr607 7.2-channel A/v Surround Home Theater Receiver black "receivers low sound" Questions

...,if it comes out same low , good quality sound level ,then issue/problem is on input source not on receiver. Sometimes the way source audio was recorded causes these issue on high quality

VERY LOW VOLUME FROM SORROUND SPEEKERs I have the Onkyo TX-SR605 and have adjusted the set up volume for these in the speaker menu all the way up and the volume is very low. The set-up ping is also ...

low sound in center & right speaker channel only inspite of giving max vol to this both channels . All wiring, settings and connections are proper. I use Bose speakers for this receivers and they work

low muffled sound from the sub at very high volume, thanks. If the sub has a volume control, turn it down then turn up the volume on the amp to the very high volume you mentioned. If it still has very

sound? the sub woofer start working when receive signal of low frequency I would say 20 to 200 Hz or depend the setup on the knob on the back of the box. if your audio do not have a low frequency then

...sound via digital coax Recently purchased a new receiver, RX861 and tried connecting to a low end Phillips DVD that supports DIVX etc... I have the DVD connected to the receiver via component video ...

low. Adjust master and surround level. There may aIso incorrect selection of the input source. Select the correct input source. If after doing this the problem still continue, it means the sound ic in

...sound is very low. If I only hook one of the wires up at a time, it is loud and sounds good, but the sound only come through one speaker. But when I hook both the wires up, the sound gets very low. ...

...Low Sound Level My receiver is hooked up but the sound level when master volume is turned all the way up is very low. I can run the TST and the sound level comes through the speakers at very good ...

...Sound goes in & out often when on a low volume. I have to mess with the volume knob to get sound back....Help...Is ther a free service manual available. i HAVE A kENWOOD KR-A5040 RECEIVER Try ...