Ricoh Aficio 1018 Printer "replace drum already replaced" Questions

drum and developer. (One thing to check quickly though is to pull the PCU out and reinstall it, just to make sure that connection isn't the problem.) You can either replace the TD sensor by itself

...drum kit already, but when we print there are still white stripes going through the sentences. Try to identify the location of the laser slit glass (will be pointing directly at drum) make sure it is ...

...CS 307 message. What is this problem?? I already tried reinstalling the drum twice. HELP!!! You most likely have a defective "yellow" PCU . Try replacing that. Otherwise you have a high voltage ...

...replace it with a sterdier frame and drum support shafts and inserted a independant motor on the transfer belt...amongst other things... the only soultion here is really replacing the whole ...

...may be shot causing repeat image. If it is in the drum area it will be hard to determine since you already replaced the drum(?). But there is a "cleaning" lamp or charge wire on the drum to

...drum" and then, problemes will start to show up. In this machine, a full image kit is available, but (i do the same) people just rebuild it.But you have to replace that 3 parts. Another advise. You ...

...the black PCU (photoconductor unit), either the drum or the charger. Replacing the black PCU will likely get rid of your lines. The Ricoh code for a black PCU if you don't already have one is

...already replaced the fuser unit and transfer roller. One possible cause could be the transfer belt cleaning section. It can get a toner build up on the blade. Take it out and wipe the blade off. The ...

...Drum. If your copy quality is good keep using it. but if you don't like the red light then you have to replace the Kit A. New kit will reset the light. regards How long ago was the Type A maintenance ...

...already. The manual is only as good as those who write it. GM blew up a lot of deisel (gasoline blocks in the early 80's) engines replacing the injector pumps. but that came down to a small part that ...