Ricoh Aficio 2018D All-In-One Laser Printer "error code 541" Questions

error code sc 541 I have a richo 2018d all in one copier machine. when I powered machine a error code genereted sc 541 what is the solution I have infotec machine when I powered machine a error code ...

Error Code SC 541 We recently had a power outage and now out printer says the error code SC 541. Can you tell me what that is and how to fix it? Its a fuser code. Hold down both of the arrow keys for ...

...error code genereted sc 541 what is the solution hi!!!!! may be the was damaged or try to clean use dry tissue or replaced the drum Hi, SC 541 is a fixing unit error, clean the thermistor and then ...

error code 541 i have ricoh 2018D machine all in one. when i start machine a code error show sc 541, what i can do hi!!!! may be the drum is damaged try to clean it use dry tissue or repkaced the drum

err0r sc 541 I have a richo 2018d all in one copier machine. when I powered machine a error code genereted sc 541 what is the solution Hi fuser code your thermistor is bad good luck

...error code on my Lanier 2145... I tried the things you posted on the laser printer but it didnt work for me. Is there something else I can do? Please email me at [email protected] Take the fuser ...

...error code 541 I've entered the SP mode and performed a All Clear fuction. This occured after I rebuilt the fuser.I do not have a tec. bulliten for this copier. Any help would be appreciated. Thanks, ...

code error i have ricoh 2022 machine all in one. when i start machine a code error show sc 541, what i can do Its a fuser code. Hold down both of the arrow keys for 10 seconds, then press enter. ...

...1018 i need to reset 541 code. when i try to erase from service mune that shows error. thanx in adv when u reset phot/txt mode button must also be pressed with ok button. press both buttons ...

...the display. How i can remove this error? It's not the PCU (photoCONDUCTOR unit), It's either a thermistor or blown out heater lamp in the fuser. Call a tech. The code can only be reset in service ...