Wharfedale PowerCube PC-10 Subwoofer "power passive" Questions

...Passive Radiators are not driven by the amp. They have no voice coil and no power goes to them. They are used to enhance the bass or lower frequencies in a speaker system. They work by utilizing the ...

Power amp outs to Subs(if they have passive crossovers built in check specs on subs). From Subs then to Main spkrs. Make sure power amp is set in stereo mode using this way. Alternative: You will need

...passive speakers don't spontaneously emit sounds. If there was a physical reason for the crackling I would think more power would make it worse or blow it up. A poor sub signal cable connection might ...

than fixing. The cost of the repair will be about the same. if you went to a passive sub/seperate power amp setup you could get a much higher quality unit, but it would cost you considerably more cash

is the gem sounds tr-150 build with an internal amp? No, these are passive speakers that need to be driven by a power amplifier

...my bose acoustimass 800 with any other receiver? hi, Surly you can connect these speakers to any receiver. It has an active subwoofer and 5 passive cube speakers. It can handle power up to 150W. ...

My speakers are buzzing. Passive speakers don't buzz in the absence of a signal that makes them buzz. Look for a single source doing it, specific cabling loose, power cords near signal wires.

...passive.If its active first check signal cables from theater system,power line of the sub, it has to be the same phase as the system.If its passive take a voltmeter disconnect the sub from the system ...

...passive crosover built in), put mixer outputs to the sub and signal outputs of the sub to amps in.If not mixer outputs to th amp and its signal outputs to the sub in.Or you can use main out of the ...

...passive' subwoofer, it gets its power from the receiver and then passes the higher frequencies to the left and right front speakers after taking out the low frequencies for the subwoofer. A speaker ...