Wharfedale Audio Players & Recorders - Recent Questions, Troubleshooting & Support

Come eliminare rumore di fondo da un subwoofer WHARFEDALE amplifier mod: PC8A

Ciao Antonio, per prima cosa scollega il segnale audio che entra nel subwoofer, verifica che abbia il volume a zero, se il rumore continua, ha problemi di rumore dall'alimentatore,
Se il rumore scompare, sostituire il cavo audio che fornisce il segnale al subwoofer

Hola Antonio, primero desconecte la se?al de audio que ingresa al Subwoofer, verifique que tenga el volumen en cero, si el ruido continua, tiene problemas de ruido por la fuente de alimentaci?n,
Si el ruido desaparece, reemplace el cable de audio que le entrega se?al al subwoofer

Wharfedale Audio... | Answered on Apr 15, 2019

0 Answers

Wharfedale wh av4337 stays in protection \overload

Wharfedale Audio... | Posted on Jan 30, 2019 | Be the first to answer

0 Answers

Wharfedale Sub-woofer Model: Power Cube DX12 won't stay on. You can turn it on, but the light slowly goes off and there is not sound.

Wharfedale Audio... | Posted on Mar 13, 2018 | Be the first to answer

2 Answers

Wharfdale sw150 subwoofer ticks then pops

It should go into standby mode when you shut the rest of your system down. The led on the back is supposed to be green when in use and red when on standby. I believe yours should have the "auto on" switch on the back. If you are manually shutting the sub off make sure it is the 1st thing you power down. It should not pop then. As much volume as it puts out you could damage the speaker if you do anything to cause a pop. If it pops while watching a movie or with music, check connections. I believe the manual says left input is the recommended one.

Wharfedale... | Answered on Feb 07, 2018

1 Answer

Wharfedale WH-AV 4337 receiver Where is the sub woofer output socket located I looked every where on the device I want to connect my sub woofer

There could be an RCA connector on the rear.

Wharfedale Audio... | Answered on Feb 06, 2018

1 Answer

My WHARFEDALE DIAMOND SW150 SUBWOOFER

There may be an open internal fuse

Wharfedale SW150... | Answered on Jan 19, 2018

1 Answer

One of our Wharfedale Titan 12 speakers has stopped working - no Power On LED, Limit LED flashes about one per sec. Is there a fuse I can check or anything else before sending to the repair shop?

There may be an internal fuse

Wharfedale Audio... | Answered on Jan 14, 2018

0 Answers

When I connect my Wharfedale Moviestar 50

I suspect your receiver is no longer sending out signals to it. Try adjusting the speaker settings and see if it has been turned off or is too low.

By the way some receivers have settings for late night listening, so you don't have to switch things off. Check your manual to see if your Receiver has these settings.

Wharfedale... | Answered on Jul 02, 2017

0 Answers