...tv lists the component as NO SIGNAL. It has been working fine for 2 months. I made no changes to any cables or anything. Please Help! DVD player is stuck in Progressive Scan mode - can happen quite ...
stuck ON somehow. If the coil is driven by a relay or power transistor switch, then it could be malfunctioning. It should not be an expensive repair, if that is what it is. Other jitters can be caused
TV for 2 hours with no problem. I turned the set off and on and it worked fine. But the next day, when I tried to turn it on I could not get a picture again. Now I am stuck. I had a technicial look at
...stuck a small fan in the back to cool down the inside of the cabinet. I love the picture on this TV so I'm doing all I can to save it. Sometimes it doesn't turn on so I have now taken off the front ...
...TV, and it is though, you have one "Big Desktop". Now IF using Nvidia or ATI then BOTH of those have thier OWN, Control Panel, this, all then can make it all a lot easier to do it. So I would suggest ...
Question about Mitsubishi Televison & Video
...TV curb bound?? Please help!! check that the button is not stuck, if button is ok, then it is a faulty control board this will need a replacement of the screen. since there was a damage of the screen ...
TV for 2 hours with no problem. I turned the set off and on and it worked fine. But the next day, when I tried to turn it on I could not get a picture again. Now I am stuck. I had a technicial look at
...stuck on button. Disconnect the wire connecting the front panel then try using the remote to power the TV. Good luck. Would any of you be willing to sell me your screens? I have a 61sdx01b and the ...
Question about Sony Televison & Video
Stuck in standby blinks 9 times over & over nothing else works. The power light dosent come on . After reading a earlier post by PREMTECH posted on Jun 6 2007 . Where he suggested replaceing parts ...
...stuck at this point. Most units give a error code "22" short protect circuit. If so check: Q5A00 C557 and or the convergence IC's (STK392-110) had failed and caused a diode (D522) to short out. If ...
46 questions posted
Usually answered in minutes!
1,031 Questions
445 Questions
373 Questions
357 Questions
327 Questions