Question about Necchi Sewing Machines
...serger pl1036 keep working out? and how can i retime it when it does? it will be working great then the screw falls out, which makes everything all wonky. i have managed to retime it once before but ...
...Serger 234D Including Needle Bar height & lower looper setting. I found 2 screws on the bottom looper holder loose and I must retime the machine not to give any further trouble. An email reply ...
I have a singer serger 14u44. Both the upper and lower looper had to be replaced. I have replaced both but can not get the thread to loop together now. I believe I need to adjust one or both. Can you ...
...serger, I don't know about them. I only tinker on my own. Remove the bottom. There is a rod running along the length of the machine. it needs to be turned 180 degrees. You may need to retime the ...
Question about Sewing Machines
...that the machine is out of time & would have to be taken to a sewing machine repair shop to be ...
Question about Janome Sewing Machines
my janome mylock 644d threads are continually breaking, have threaded the machine correctly, will sew for a few centimetres and then thread breaks. Any suggestions? If you have not already done so, ...
Presser foot no longer lifts Was told the gear inside is plastic and has stripped. Trying to find parts, since does not seem feasible to ship so heavy a machine. Local sewing shop may have repairman. ...
My Juki MO 1000 Serger has locked up in a certain position. I did experience the right needle to bend but not break which I promptly removed and replaced with a stronger needle, however shortly after.
...is off, find a sewing repair person to retime the serger. Don't try it yourself or put this repair off. If the loopers go further out of timing, they might hit something and replacement can be
156 questions posted
Usually answered in minutes!
125 Questions
111 Questions
69 Questions
52 Questions
