Trying to tune it to TV stations without a remote Depends on the manual , some off them have facilty to tune in the set itseld with auto tune facitlity.
...tune my VCR?? I have tuned a TV channel for the VCR (so that is all good) it is just the actual VCR that I need help with. Thanks do you have cable? if yes both tv and vcr should be on ch #3 (to ...
...auto tune by holding down both the CHANNEL ( +, - ) buttons on the VCR simultaneously for more than 2 seconds. The TV stations in your area will be automatically preset in order starting from ...
retune a video player how do i retune an orion video to tv do you still have your remote? You may need it to go to menu - setup - auto tune, that may help you
...tune my vcr ? I assume you are talking about the tracking control. Older VCRs had a control that allowed you to make adjustments within a narrow range by turning a knob and newer machines have ...
...other channels? I have an Panasonic VHS. If you have a cable system hook-up, in the menu setup there is a selection for type of TV signal, select cable and then select the auto channel tune
...Auto set up didn't work and I cannot tune in manually. To make matters worse the vcr thinks my video channel is channel 4 whereas it is AV1, further on viewing things through channel 4 (my only ...
...tune a NTSC Broadcast through its tuner, and watch on your TV. You will only get a B&W picture. To atleast view NTSC Tapes, use the Remote of the VCR, and set System to AUTO or NTSC. Again, there are ...
...auto tune which did all the hard work for you. but a lot did not and were a pain to set up. look on top or on the front for the little hatch. Good luck Pleasae rate my help++++Thanls for using ...
2 questions posted
Usually answered in minutes!
443 Questions
354 Questions
208 Questions
175 Questions
149 Questions