Epson PowerLite 61P Multimedia Projector "overheats runs fine" Questions

won't turn on was working fine, then it powered off suddenly. All lights are completely off and it won't turn back on. I've checked the power source, everything is working fine. How long has it been ...

...runs fine. When it is hanging from a ceiling mount it starts and runs for 30 seconds and then shuts down - no overheat lights or messages, it just shuts down. The bulb has less than 100 hours and the ...

...fine, also use compressed air to blow out fan and cooling fins from the unit frequently from the openings on the unit. I have always run Eco mode and it never overheats except when turned off a few ...

The lamp on my Infocus Screenplay 7210 shuts down My Screenplay 7210 will run fine for a while, but then the lamp shuts off. After that, even if you turn off the projector, the fan will never stop ...

overheats ( overheating ) when turned upside down and hung from my ceiling. My solution...I went to Circuit City and bought two 80mm computer fans. I also purchased a 12V power supply from Radio Shack

...runs for about 45 minutes and shuts down. The fans are still running but the lamp goes out. All filters have been cleaned and there are no obstructions as far as ventilation. Any suggestions?Thanks! ...

haze green yellow purple haze in centre of screen Rather hard to properly diagnose this one off such a short description, but... 1/ Bulb OK, not over hours or otherwise damaged? 2/ Is it constant for ...

Wonderwall projector has black spot in middle of screen Wonderwall projector plays fine for about 3 minutes before a black spot begins to appear and grow larger. What's going on? Tranlucent dark spot ...

...overheats and turns off after a minute of use Whenever I turn on the projector, it works fine, though the fans tend to run harder than normal. After about a minute, the temperature light comes on and ...

turning off my projection tv keeps turning off Check that the fan is operating--without a properly operating fan the projector will overheat and trip the thermal switch. Also check that the filter is ...