Brother MFC 6800 All-In-One Laser Printer "grinding noise new" Questions

...new toner cartridge, or even the old one if you still have it. Check if the grinding noises go away. Changing the toer cartridge completely fixed the problem. I returned the defective genunie Bher ...

...paper can be lifted to the roller easily. Also take out your toner and drum and turn it on, if the grinding noise is gone you may need a new toner, some refilled toners are too tight to turn

...grinding sound that doesn't sounds like it's doing any good. It hasn't been dropped or knocked or anything, it just randomly started making this noise. Not sure how to stop the noise and get rid of ...

...grinding noise. I just replaced new drum. I checked for broken brown gear , but it is fine. What else could it be? Thanks Paul 1) Unplug machine. 2) Hold down menu key while plugging in machine. 3) ...

...grinding type noise for about 20 seconds and then the error message appeared.My printer was still under the original manufacturer's warranty so I called and they hhad a replacement shipped to my ...

...noise. Like grinding gears and melting wire. So do I toss this and write off another 300 bucks for a new one or tinker? Any ideas? My only thought is tear into the light bar area and move it manually ...

...grinding noises. i have opened up the printer and found the problem wich was fuser unir gear was smashed so i have chaned the fuser unit with the new one but i did not see the gear that drives the ...

grinding noise new fuser and fuser drive gear, loud grinding noise as motors start "Swing plate assembly" (RM1-0043-020CN) need to replace to avoid grinding noise. ..Note: Only professionals can ...

...a grinding noise when turn on My 928 printer makes a loud grinding noise when the ink moves accross to the right hand side, also the red coulor is not coming out onto the paper the cartrige is ...

grinding noise on OKI C3300 I have changed the toners, and the yellow one was causing problems, at that time all was well, The yellow was replaced immediately and after replacing this the printer now ...