Zenith ZN-501S Remote Control "perform channel direct tv" Questions

senith tv How do I program my tv to get more channels from cable tv? Usually, on a modern set, you hook the cable directly to the TV, go into the menu and perform the AUTOPROGRAM. That's it!

...TV, in this case]. The red indicator blinks off once. 5. Press the CHANNEL UP button repeatedly (up to 300 times) until the device to be controlled changes channel. The red indicator blinks off with ...

...channel. 6. Press and release MUTE to install the code. Note, when all codes under a Brand have been searched the red indicator flashes rapidly for 3 seconds. Code Search (by Device) If after trying ...

...CHANNEL UP changesdirection to forward again.5. Press and release MUTE to install the code.Most users will store VCR codes under the VCR button,Cable codes under CABLE, etc. If (for example) youwant ...

TV, VCR, etc.). The red indicator blinks off once. 4. Press and release the numeric button (0-9) corresponding to desired Manufacturer (see table on code list sheet). The red indicator blinks off once

TV, VCR, etc.). The red indicator blinks off once. 4. Press and release the numeric button (0-9) corresponding to desired Manufacturer (see table on code list sheet). The red indicator blinks off once

direct tv channels how can I clear remote and reset it Link to the manual http://audiovox2.info/docs/rca_acc/man/D770_DOC_OM.PDF Problem: The remote is not performing commands properly. ? You must put

TV, VCR, etc.). The red indicator blinks off once. 4. Press and release the numeric button (0-9) corresponding to desired Manufacturer (see table on code list sheet). The red indicator blinks off once

channel. 6. Press and release MUTE to install the code. Note, when all modes under a Brand have been searched the red indicator flashes rapidly for 3 seconds. _________________________________________