Zenith Televison & Video - Recent Questions, Troubleshooting & Support


I'm sorry you have not been given a clear ansewer on how to repair your TV. I know how to fix the problem you are having (1.5 inch Black vertical lines that come and go) If you still need help fixing your Plasma TV please feel free to message me @ [email protected] or just give me a call @ 1-503-432-9904 and I'll help you fix your TV buddy! Ask for Dave!

Talk to you later buddy!

Dave
[email protected]

Zenith P42W34P... • Answered on Apr 05, 2021


A common practice in the TV industry is to include the size in inches in the model number. Often, a model will be made in different sizes, for example, z42pj240 may have a z50pj240 family member. They will use the same main circuit boards and remote controls. Check the list in your universal remote control manual for a variant like that.

Zenith Televison... • Answered on Mar 29, 2021


Hi, it sounds like either the eject button on the DVD player drawer has been damaged or the remote is in need of cleaning (I assume the remote to have an eject button too). you can remove the remote by removing a battery and seeing if the problem stops.
Best you remove the tape from the DVD drawer as this will not stop the DVD mechanism from trying to open the tray, bit like trying to constantly push against a locked door - you will cause damage if it hasn't already.

Zenith XBV442... • Answered on Feb 17, 2021


Its fixable. the question is how much of the inside broke with it. cost for repair on that usually averages 45 to 65 dollars... unless tuner is damaged in most cases not. if not hooked to tuner then maybe a new isolation block..simple job Good luck

Zenith C27A24T... • Answered on Dec 19, 2020


If you are trying to use the player and switch between DVD and VCR there is usually a button on the front of the player and a matching one on the remote. VCRs are becoming very rare now so most TVs don't have the connectors for them. How old your TV is will control how you do this. Older HD TVs are fitted with a SCART connector, ( a large, chunky, rectangular connector with lots of pin holes), or RCA connectors, (3 round pin connectors coloured red, white and yellow). *Note* Make sure you use the 'OUT' connectors on the VCR and the 'IN' connectors on the TV. Some newer TVs will let you connect through a 'screw in' Satellite/'CABLE TV wire connector.

Zenith Televison... • Answered on Nov 20, 2020


Plugged it in an all the lights stay on can't push any buttons but the power button took the top off there's no dvd in there and everything looks fine

Zenith DVC2550... • Answered on Oct 17, 2020


Hello [1] Switch your television on

[2] Point the remote control towards the television

[3] Press and hold the TV POWER button, and

then enter the two-figure code in the table

to the right that corresponds to the brand of

your television by pressing the appropriate

number buttons.

If your television is compatible with the remote

control, it will switch off.

The remote is now programmed to operate the TV.The code for Zenith TV is [TV POWER + 63]

Zenith ZEN700... • Answered on Jul 22, 2020


This will fix change the dvb312 to region free for an individual dvd. Must be repeated each time you want region free.
Insert the different region dvd.
A message will appear on the screen "check region" (or something like that)
On you remote control press the "display" button. Quickly press the number buttons, "1", "2" and "3". It should now let you play the dvd.
It has worked on mine which was bought in 2003. We have watched a ton of region 2 movies. Good luck.

Zenith DVB312... • Answered on Jun 29, 2020


I'm assuming your Disney tapes are store-bought, as opposed to recorded off the air. If that's true, the reason you can't record them to your dvd recorder is because of copy-protection. Sorry...can't advise you how to break that.

Zenith XBR716 • Answered on May 07, 2020


1) tune the desired station frequency
2) while the frequency is being displayed, quickly press the memo set/clock adjust button.
3) press the desired preset button
4) press the memo set/clock adj button again
5) the station will be stored

Zenith Televison... • Answered on Apr 24, 2020


To set the Alarm press the Alarm Set button then use the set buttons on top change the Alarm time. Use the to change the Alarm time, when the Alarm time is set press and hold enter until you hear a beep. Press the Alarm On/Off button to select radio or buzzer for the alarm or alarm off. http://portablemedia.manualsonline.com/support/zenith/clock-radio/zenith-1233a-how-do-you-set-the-time-on-the-clock-4514622

Zenith Televison... • Answered on Apr 23, 2020


Digit Zenith TV Converter Box Remote Codes
212
254
267
357
454
457
557
657
757
857
955
957
991

4 Digit Zenith Converter TV Box Remote Codes
1415
9910

5 Digit Zenith Converter Box TV Remote Codes
01414
51415

Zenith Televison... • Answered on Apr 22, 2020


the AVI discs are DIVX I am assuming.. Does your player support DIVX media? I am not sure what your model is, but I am thinking that your player will not support DIVX. If this is the case, you might need to burn new DVDs in the traditional VOB format that it can see. Check your owners manual to see about DIVX support.

thanks!
Stan Skaggs

Zenith XBV342... • Answered on Jan 04, 2020


There are at least two types of AVI formats that I know about: DIVX and XVID. When you encode your movie files are you encoding them always to DIVX? Some machines can play one format and not the other.

Did you make sure to handle the disc with care and not smudge it with your fingers? Dirty discs can easily be cleaned, using a super soft cloth & rubbing alcohol wiping in a swirling motion as you go around the disc. Discs with scratches need to be taken to a shop and professionally repaired.

Is the machine itself dirty? Simple fix: CD/DVD cleaner disc. Its got these little brushes on it to clean the laser eye.

Are you covering up any air holes on the outer case? Don't cover these up or the machine will get too hot, and will refuse to play anything.

Zenith XBR413... • Answered on Jan 04, 2020


Is the VHS tape you are trying to record a commercial VHS tape (movie)? If so, it may have copy protection on it. The recorder is probably programmed to prevent you from making and using DVDs of commercial copy-protected VHS tapes.

Zenith XBR716 • Answered on Nov 07, 2019

Not finding what you are looking for?
Zenith Logo

5,454 questions posted

Ask a Question

Usually answered in minutes!

Top Zenith Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76584 Answers

Demonic-2011
Demonic-2011

Level 3 Expert

513 Answers

Cindy Wells

Level 3 Expert

6259 Answers

Are you a Zenith Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...