Zenith VR4207HF VHS VCR "connect tv set converter" Questions

...TV. The VHS worked perfectly up until digital box installed. Wayne from Chattanooga You need to set the vcr to channel 3 or 4 (whatever channel the digital converter box is set to broadcast on) to ...

...connect from converter box ANT OUT to VCR ANT IN, and VCR ANT OUT connected to TV ANT IN. Both VCR and Converter box are set to video channel 3. For a very brief time, I had this working and was able ...

TV is set on channel 3. I have also tried recording putting the converter signal into the TV and the TV output to the VCR with no better luck. Suggestions? Is it possible to record TV programming on a

...for an explanation. The TV converter box connects to the VCR and the VCR connects to the TV. Be sure you set the TV on channel 3 (or 4) if using a coax cable

...set up: I have a projector that I run thru the vcr for the analog tv reception (The projector does not generate a tv signal). So how should I configure the hdtv converter box? I do not have cable. I ...

...TV. Select whatever channel you desire, make sure that the VCR is on Channel 3 or 4, (Whichever the back of the cable box is set) then select 3,4 or line/AUX to see the results....accordianman Tell ...

tv set of course. The tv only has the coaxial connection, so I used to run everything thru the VCR. Now by adding this converter box....I am lost! I hooked everything up as I thought it should be, the

...connect a digital set box to it to record any TV programs, seeing that most countries are switching off or have switched off analogue TV. The video would then pass any signal it had recorded via a ...

...Connect a second co-ax cable to the TV to complete the signal loop. Tune your TV on the channel you want to watch/record. Put the VCR on channel three on the display screen. Try recording and play it ...

...the VCR is old school now and this probably will not happen. There is a diagram on this page to connect your VCR to the TV and converter box: ...