Question about OKI B Office Equipment & Supplies
ID Unit is not installed and Toner Sensor Error. Cannot find anything in the "Help" menu and do not have the paper manual. Can you assist please. Yup Dodgy refill cart without require chip to identify
...ID sensor it retires the image unit and it cleans it? This happens when mylar of the cleaning unit is damaged Your problem in the developer unit parts.Please cleane the unit and process the auto ...
...Error The K ID unit is not operating properly. Check to confirm that Image Drum is seated properly. Check to confirm that the K ID unit is in position. Replace the K ID unit. Replace the K ID
...ID sensor board" in the Replacement and Adjustment section. 3. Check the spring at the PTR unit contact lever. (See "PTR Unit Contact Motor" in the chapter "Replacement and Adjustment".) 4. Replace ...
...ID sensor harness, connector is loose, broken, or defective • ID sensor dirty • ID sensor defective • IOB defective • LD Unit defective • BCU defective • Development power pack ...
...left side cover, disconnect IDS connectivity, take out IDS( Ink delivery system know as ISS). this unit contains two compartments left unit drives 0,1&2 cartridges and right unit drives
Question about Ricoh Office Equipment & Supplies
How do you clean the ID sensor on Ricoh 1045? take the drum unit out. right on top of drum unit there is id sensor mounted on the frame. clean it very carefully with a piece of cloth.
...PROBLEM SC350-1 ID sensor error dirty id sensor-- pull out the drum unit and from the right door clean the id sensor (above the drum)with a dry cloth enter service mood put 3001-2 and ...
...kopiranje se pojavuva kljuch so functional problems SC350-01.Aparat Ricoh 450. sc 350 is the ID sensor error. clean the ID sensor and it should be fine. the ID sensor is located above the drum
13 questions posted
Usually answered in minutes!
103 Questions
111 Questions
28 Questions
50 Questions
30 Questions
