Pioneer PRO-200 60" Rear Projection Television "spec 2" Questions

...and night scenes on screen can harldy be seen Test the voltage to the bulbs and see if it meets specs. May be a power supply

spec sheets for both of these SIP's and the 180s should be fine in place of the 110s although the circuit toshiba is using has 2 ohm resistors in place of the 3 ohm suggested by the data sheet, should

...2 months after that, this started happening. We thought there was interferance somehow so we changed the electrical outlet and all was fine for a couple of weeks and it started again and hasn't ...

for less than 1VDC. Any voltage higher than that indicates a faulty fan. If all voltages are within specs, the H4 board must be replaced. If a fan is found defective, the optical block will need to be

...KEEPS FLASHING CAN ENY ONE PLEASE HELP ME .THANX I have a sony kp-41T65 burnt capacitor C514. need specs. Help please. ...

Tv is having wave problems and little blue specs MY Mitsubishi DLP is experiencing problems, two different ones. 1. on all the channels, (and dvds) blue specs go in and out (like blow snow) as if the ...

...This will bring up the reset menu. Hit enter on the remote and your TV will reset to factory

...video signal on input 2 the picture looks very red. thank you, ra You have a component not up to specs in your input 2 circuitry possibly a capacior. You would need a service manual to locate

black specs on screen and couple white ones? ebritton..had same issue with its bigger brother the wd65733..white spots and black specs..started out as 2..with in 2 weeks hundreds and hundreds of them.