off. I tried everything but now i need help. some amps are made more for low ohm loads (bass) and some are made for high impedence loads (mids/highs) and it seems you are asking too much from your amp
...bass on my denon amp A few ways to get more bass here you go John. If you have a sub check your level and crossover settings on sub and on amp, on the sub half volume and 90-120 crossover should be ...
Question about Pioneer Audio Players & Recorders
...amp be hooked up to this recevier for more bass power Amps don't 'make' bass. They amplify what comes into them as accurately as possible. Your source makes the bass and speakers recreate it to ...
...bass ( use a Yamaha TYROS keyboard & Vocals) so i purchassed a pair of Peavey messanger Pro 15 Sub Cabs 4Ohm cant seem to get a balance bass woofs on several notes on the bass line of certain ...
...bass amp has an awful buzz in it. It buzzes no matter if the knobs are at 0 or 10, whether a bass in plugged in or not. I know it's not the cable, or the bass because I've tried several different of ...
...bass amp, but will certainly do the job. So long as you are not trying to keep up with a Fender twin, or a Marshall stack. 100 watts don't go far for bass. I would go for the single 15 inch driver to ...
...amp to turn the bass u por dowm when its turned down everythings fine but when you turn the bass up the subs just pound like crazy not to the music idk if its my rcas or what it never did it with the ...
Question about Audio Players & Recorders
...bass speaker will show whether the amp needs repair or whether the speaker is faulty. For amps with a single output, as you still have midrange, I suggest you suspect the speaker unit and you should ...
Question about Audio Players & Recorders
...bass shakers to my amp and control the output on each shaker Please note that you can't simply wire them together in series or parallel. Connecting any more than 2 would likely cause damage to your ...
Question about Audio Players & Recorders
...AMP in the BASS circuit. The BASS frequency must be enhance with an amplification and a pass filter with amplification boost and so a failure of this stage can be the reason for non action.You ...
28 questions posted
Usually answered in minutes!
325 Questions
254 Questions
185 Questions
116 Questions
103 Questions