Mitsubishi VS-45607 45" Rear Projection Television "picture rolls jumps" Questions

...picture. The screen just jumps and rolls all of the time. It is very hard watching the TV and forget about reading anything on the screen. The television is about 10 years old. Try Re-soldering the ...

Vs-60705 Bigscreen turn on vertical roll warms up stops rolling and begins jumping up and down also picture is not clear Check C2P05[ location on convergence board]. This is a 16volt 100Mf cap that is

mitsubishi rear projection tv when the tv comes on the picture shakes or there are lines that span the picture that vibrate. After the tv warms up, it all stops and is ok. What is causing this? Thanks

...picture jumps, tears or rolls, you have a Hyper Board that is failing. The last I checked, the Hyper Board is not available from Toshiba and has not been available for a number of years. I hope this ...

...picture jumps when cold but on screen menu does not it is a bad filter cap, site will have location for both, easy fix and cheap parts. I usually in this case change both caps, saves having to do two ...

after warm-up, picture jumps intermittenly. looks like its trying to verticle roll. bad caps in vertical output and conn. on vertical output ic

picture is rolling jumping horizontally andvartically you must change some condensators near vertical IC in tv chasis....

...PICTURE JUMPS. CAN U HELP ME 1. VERTICAL ROLLING, VERTICAL BLANKING BAR LOCKING IN THE MIDDLE OF THE PICTURE, ALSO MAY HAVE HORIZONTAL PULLING OR TEARING. CHECK C2C52 10 UFD @ 50 V OFF THE BASE OF ...

picture keeps jumping Whether you mean rolling, as in loss of vertical hold, or irregular jerks, the problem is due to a ;pwered voltage. As rear projection TVs age certain capacitors lose the ability

56 rca hdtv The picture has suddenly changed where it is located on the screen, it is not centered, if it was an old tv I would look for the horizontal/vertial adjustment (and I did look). The picture