...shadow images Shadow images may caused by several things : 1. Deformed rubber of the cleaning blade, 2. Drum aging, 3. Upper heater roller
...is generally caused by excess debris remaining on the drum. This is mostly caused by the wiper blade not dislodging all the waste toner. You will need to replace the cartridge
...shadows are usually parts of the same page we just printed. Can't figure out what's causing it. Usually the Drum and the cleaning blade must be replaced together. Hope you done this already, if not ...
Question about Xerox Office Equipment & Supplies
...and then it's disappier. is there any solution One of 2 things, Replace the transfer cleaning blade. You may be able to clean it and get rid og the problem. The second thing to try is to
Cleaning blade did not work Thanks, kidtree, for solution. I did use the cleaning blade several times when the problem occurred and again just now, but it didn't work. I've replaced 2 drum cartridges ...
...remove the catridge and clean it and fix it again. Clean imaging unit or PCU, check cleaning blade and fuser roller damage. Usually Cleaning Blade and Fuser Roller if damage replace
Question about Ricoh Office Equipment & Supplies
...cartridge, and you can lift the toner cartridge out of the drum cartridge. There is a cleaning blade in there - a soft plastic blade that rides against the drum and scrapes off toner that didn't ...
...copies come out with a second or shadow image and with a dirty grey colour all over Drum, cleaning blade, and PCR need replacing, and most likely the developer as well. This is not something that
...than just putting it in? Are there settings that need to be set or adjusted? check your cleaning blade. and make sure you have the right drums> Remove the red screws from the drum.(2 pcs - the ...
169 questions posted
Usually answered in minutes!
629 Questions
382 Questions
267 Questions
215 Questions
218 Questions
